2015년 1월 20일 화요일

N keyboard 의 메카닉 LED 적축

한 일주일을 고민 했습니다.
어떤 키보드를 사야하나 기계식으로 결정해 놓고 덱 혜슘 과 메카닉  LED 두가지로 함축 한다음 결국은 메카닉 LED 적축으로 질렀습니다.
약 15만 몇천원 적은 돈은 아니지만 투자 할 가치가 있다 판단 한국이  IT 제품은 잘만들것이라는 믿음을 가지고 ㅋㅋ( 덱 해슘이 비싸서 사고 싶어도 못샀습니다.)


우선 키보드 소리 부분인데

적축이라 소리는 적은 편이지만 기계식 키보드의 느낌은 살아 있습니다.
사고 나서 알았지만 갈축이 적당한 합의점을 가지고 있는 것 같아 약간 아쉬 웠습니다.
청축으로 시작해서 갈축으로 끝난다는 말이 뭔가 알것 같습니다.
전 적축으로 시작 했지만 청축은 가지 않을 것 같고 기회가 된다면 갈축을 하나 더 다른 브랜드로 살것 같습니다.
요즘은 집에 컴퓨터가 몇대씩 있으니 키보드 도 3개는 필요 할듯 합니다. 회사 1개 , 집에 2개 정도 ㅋㅋ

동봉된 키보드 스킨을 사용시 키보드 소리는 조용한 편입니다.
같은 방에서 누가 잠을 자도 키보드를 편하게 칠 수 있을 것 같습니다.
키보드 스킨을 빼면 키보드 소리는 기계식 키보드에 걸맞는 소리가 나와 줍니다.



[단점]
 엔터키의 크기인데 보통 일자 엔터키가 요즘 주류 이며
한국에서 판매되는 저가의 멤브레인 키보드는 거이다 위와 같이 좌우가 바뀐 L 자입니다.

호불호가 가 분명하게 갈리는 부분이지만
엔터키에 대한 키감은 신경써 주셨으면 하는 제조사에 대한 바람 입니다.

예전 386,486 시절의 키보드에서 엔터키 및 조금 크기가 큰 키보드들이 오래 쓰다 보면 마모에 의해 파손 되는 경우가 발생했는데 메카닉LED 엔터 키도 약간 우려 스럽습니다.

엔터키의 윗부분을 눌렀을때의 느낌은 이것도 저것도 아닌 키감 입니다.
정말 15만원 짜리 키보드나 쉽은 정말 아쉬운 결과물이구나 하는 생각 이 듭니다.

어느 한 인터넷 커뮤니티에서 이것은 저가의 멤브레인 키보드에서도 이런 느낌은 아니다 라고 한것을 봤는데 "정말 뒤통 수 한대 맞은 느낌 입니다."

그리고 다른 한가지는 키캡의 재질 문제인데
겉으보기에는 잘 알 수 없으나  키캡을 분리해 자세히 살펴 보면
하얀색 키캡에 검은색 도료를 입혀 LED 불빛이 세어나올 수 있도록 각인 된 부분을 제거한 형태 입니다.
검은 도료 부분이 오래 되면 벗겨질 수 있을 듯한  느낌 입니다.

겉으로 보기에는 고급 스러우나 자세히 살펴 보면 공정상 어쩔 수 없이 절감 한 것 같습니다.


LED 에 대해서는 여기저기 많은 정보를 얻을 수 있어서 패스
디자인 면에서 봤을 때 무난 합니다. 약간 무거우며 든든하게 바처 줍니다.
예전 저가 키보 드 사용시 키보드가 도망 도 가고 여기저기 균형이 맞지 않아 불안 했는데
그런점은 없습니다.

디자인 에서 아쉬운 점은 매크로 키 우축의 빈 부분이 있는데 약간 밖으로 비스듬하게 기울어져 있습니다. 이곳을 필기도구를 올려 놓을 수 있는 공간으로 활용 할 수 있게 했으면 좋았을 거 같습니다. 분명 제조사에서도 이분을 생각 안했을리가 없지만 분명 필요 없는 공간 같습니다.
이건 그냥 생각 해본 것인데 주판매 대상이 게임방 쪽이라 윗부분에 볼펜 같은 필기도구를 올려 놓게 해놓으면 아마도 사용자들이 피던 담배를 많이 올려 놓을 것이라 생각해 약간 밖으로 기울게 해 아무 것도 올려 놓을 수 없게 한 의도적인 디자인 같습니다.ㅋㅋㅋ

매크로 기능은 사용 하면 편리 할것 같은데.. 언젠가 쓰겠지 하는 생각으로 고민중

마지막으로

이글을 쓰는 이유는 키보드 구매한 김에 뭔가 써야 할 것 같고
이런 부분에 대해서 인터넷을 찾아 봤지만 관련 정보 찾기도 힘들 었습니다.
모두다 비슷한 내용만 있으니 결정하는데 더 고민 스럽게 하더군요
조금씩 이글에 대해서 엡데이트 해 더욱더 충실하게 만들어 갈예정 입니다.

-끝-

구매시 참고하세요





2015년 1월 5일 월요일

centos 7 에서 마리아디비 설치 후 에러발생시 아래와 같이 하면 해결 할 수 있습니다.

Failed to start MariaDB database server.


[root@m50 ~]# yum remove mariadb-libs
[root@m50 ~]# yum remove mariadb mariadb-server

systemctl start mariadb.service
아래와 같은 error 발생 후 실행 되지 않는다.

 mariadb.service: control process exited, code=exited status=1

yum remove mariadb-server

마리아 디비의 기존 mysql 과의 소소한 퍼미션 관계 에의한 에러 방지 위해 기존 디비까지 삭제

cd /var/lib && rm -rfv mysql

yum -y install mariadb-server

2틀간 삽질 후 알았는데
저와 같은 실 수 하지 마세요

수고요


2014년 5월 18일 일요일

kali linux gpg error 칼리 리눅스 gpg 에러

kali linux gpg error 칼리 리눅스 gpg 에러

에러 발생시 다음과 같이 조치 하면 진행 된다.

gpg --keyserver pgpkeys.mit.edu --recv-key  ED444FF07D8D0BF6


gpg -a --export ED444FF07D8D0BF6 | sudo apt-key add -


지속적으로 문제 발생시 gpg키 삭제후 재시도 해본다.




2014년 5월 17일 토요일

debian source list add backtack

If you are not familiar with piping this is what this long string of command means:

1. wget http://all.repository.backtrack-linux.org/backtrack.gpg

2. sudo apt-key add backtrack.gpg

wget http://all.repository.backtrack-linux.org/backtrack.gpg -O -

This means download backtrack.gpg and output to stdout (standard output stream)

sudo apt-key add -

This means add apt-key from the stdin (standard input stream)

wget http://all.repository.backtrack-linux.org/backtrack.gpg -O – | sudo apt-key add -

Add the repositories

Edit the file /etc/apt/sources.list with your favourite text editor.

#backtrack
deb http://all.repository.backtrack-linux.org revolution main microverse non-free testing
deb http://all.repository.backtrack-linux.org revolution main microverse non-free testing
deb http://all.repository.backtrack-linux.org revolution main microverse non-free testing

2014년 5월 6일 화요일

freebsd x60 /etc/ 설정 파일

 /etc/rc.conf

#vesa mode
allscreens_flags="-g 132x60 MODE_280"
#host mode
hostname="x60_fly"
keymap="us.iso.kbd"

# wireless
wlans_wpi0="wlan0"
ifconfig_wlan0="WPA DHCP"

#ssh server
sshd_enable="YES"

# power saving
powerd_enable="YES"
performance_cx_lowest="C3"
economy_cx_lowest="C3"

# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="NO"
dbus_enable="YES"
hald_enable="YES"
gdm_enable="YES"
linux_enable="YES"
gnome_enabLe="YES"
polkitd_enable="YES"

# disable sendmail
sendmail_enable="NONE"

# trackpad scrolling
moused_enable="YES"
moused_flags="-V"


# auto usb hdd mount
devfs_system_ruleset="mypassport"
fusefs_enable="YES"
fuse_load="YES"


/etc/sysctl.conf


# $FreeBSD: release/10.0.0/etc/sysctl.conf 112200 2003-03-13 18:43:50Z mux $
#
#  This file is read when going to multi-user and its contents piped thru
#  ``sysctl'' to adjust kernel values.  ``man 5 sysctl.conf'' for details.
#

# Uncomment this to prevent users from seeing information about processes that
# are being run under another UID.
#security.bsd.see_other_uids=0






 #대기 모드 진입 금지 옵션
debug.bootverbose=1






debug.acpi.suspend_bounce=1
# 크롬 실행 위한 설정
kern.ipc.shm_allow_removed=1

hw.acpi.verbose=1
hw.acpi.reset_video=1

hw.acpi.lid_switch_state=S3
hw.acpi.sleep_button_state=S3
hw.acpi.sleep_delay=3
hw.acpi.power_button_state=S5

# enable ThinkPad buttons
dev.acpi_ibm.0.events=1
dev.acpi_ibm.0.fan_level=0

# allow regular users to mount removable devices
vfs.usermount=1

# disable speaker beep
hw.syscons.bell=0



2014년 5월 1일 목요일

리눅스 매직 키

Using the Magic SysRq Key

The SysRq key is located near the Scroll Lock key on your keyboard – the Sys Rq key is generally the same as your Print Screen key. The “magic” SysRq combination is Alt+SysRq.

To use this key combination, your Linux kernel must have been compiled with the CONFIG_MAGIC_SYSRQ compile option – most Linux distributions will have this enabled by default. Assuming it’s compiled into your kernel, it can be enabled or disabled on a running system by changing the value of /proc/sys/kernel/sysrq. To check if it’s enabled, run the following command:

    cat /proc/sys/kernel/sysrq

If you see a “1”, the magic SysRq key is enabled.

image

If you see a “0”, you’ll have to enable it yourself by running the following command as root:

    echo “1” > /proc/sys/kernel/sysrq

Dealing With a Frozen X Server

If your X server (the program that runs your graphical desktop) freezes, you may find yourself unable to use your system. There are a few magic SysRq commands that can help:

    Alt + SysRq + r – Takes the keyboard out of raw mode, taking control away from the X server. After running this combination, you should be able to use the Ctrl + Alt + F1 (and other F-key) keyboard shortcuts to switch to another console and restart X.
    Alt + SysRq + k – Kills all programs on the current virtual console, including X. You can also enable the Ctrl+Alt+Backspace keyboard shortcut in Ubuntu’s keyboard preferences to restart your X server – however, this shortcut is implemented by the X server and may not always work.

Cleanly Restarting Your System

Used in sequence, some of these actions can be used to cleanly end processes, flush data to disk, unmount all file systems, and restart your computer. To perform this process, press and hold the Alt + SysRq key combination and – while holding the Alt and SysRq keys down — type the following keys in order, pausing for several seconds in between each key:

    reisub

The mnemonic “Raising Elephants Is So Utterly Boring” is often used to remember this sequence. Here’s what each key does:

    r – Puts the keyboard into raw mode, taking control of it away from the X server.
    e – Sends the terminate signal to all processes, asking them to end gracefully.
    i – Sends the kill signal to all processes, forcing them to end immediately.
    s – Flushes data from your cache to disk.
    u – Remounts all file systems read-only.
    b – Reboots your computer.

More Commands

Here are some other actions you can perform with the magic SysRq key. To perform an action, press and hold the Alt + SysRq keys while typing the letter:

    n – Resets the nice level (priority) of all high and realtime priority processes.
    f – Calls oom_kill, which will kill a memory-hogging process.
    o – Shuts off the computer.

There are other actions, but they may be more useful to developers than the average Linux geek. For more information on the magic SysRq key – and a full list of actions you can perform – consult the sysrq.txt file included with the Linux kernel.

freebsd magic key

* How do I use the magic SysRQ key? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On x86 - You press the key combo 'ALT-SysRQ-<command key>'. Note - Some (older?) may not have a key labeled 'SysRQ'. The 'SysRQ' key is also known as the 'Print Screen' key.

On SPARC - You press 'ALT-STOP-<command key>', I believe.

On PowerPC - You press 'ALT-Print Screen-<command key>'.

On other - If you know of the key combos for other architectures, please let me know so I can add them to this section.

* What are the 'command' keys? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 'r' - Turns off keyboard raw mode and sets it to XLATE.

'k' - Kills all programs on the current virtual console.

'b' - Will immediately reboot the system without syncing or unmounting your disks.

'o' - Will shut your system off (if configured and supported).

's' - Will attempt to sync all mounted filesystems.

'u' - Will attempt to remount all mounted filesystems read-only.

'p' - Will dump the current registers and flags to your console.

't' - Will dump a list of current tasks and their information to your console.

'm' - Will dump current memory info to your console.

'0'-'9' - Sets the console log level, controlling which kernel messages will be printed to your console. ('0', for example would make it so that only emergency messages like PANICs or OOPSes would make it to your console.)

'e' - Send a SIGTERM to all processes, except for init.

'i' - Send a SIGKILL to all processes, except for init.

'l' - Send a SIGKILL to all processes, INCLUDING init. (Your system will be non-functional after this.)

* Okay, so what can I use them for?